Goplus® Folding 2″ Trailer Hitch Shank Mount Cargo Wheelchair Carrier Adapter- 500LB

February 24, 2017 - Comment

Our folding 2″ trailer hitch mount adapter can help you to connect a basket with your cargo, so you can load your goods in your cargo. Made of solid steel, this hitch max weight capacity reach 500lbs. This item can add versatility to your cargo carrier and wheelchair carrier by using the folding adapter. This

Add to Cart $27.99Amazon.com Price
(as of 00:45 UTC - Details)

Our folding 2″ trailer hitch mount adapter can help you to connect a basket with your cargo, so you can load your goods in your cargo. Made of solid steel, this hitch max weight capacity reach 500lbs. This item can add versatility to your cargo carrier and wheelchair carrier by using the folding adapter. This allows your hitch mounted products to fold up towards that rear of the vehicle when not loaded with cargo. Great for saving space for parking in garages or on the street. Do not hesitate to buy one!

Product Features

  • Weight capacity: 500lbs
  • Folding Cargo Carrier Adapter for 2 Inch Trailer Hitches
  • Work with 2″x2″ trailer hitches
  • Length after folding 90 degree: 16 1/4″
  • Overall length: 19 4/5″

Comments

jim says:

holes do not match holes in cosko carrier. must … holes do not match holes in cosko carrier. must buy a large bolt and drill bit to fix it. can be extra costly!

Amazon Customer says:

I’m happy with it works ok but the holes do not line up with the shaft that goes into it. Also, if you have a pin in the outer hole, you cannot move the arm up or down because the pin strikes the side rails. I had to take this to a shop to have the side rails cut and to have my cargo carrier modified to work with the adapter. Other than spending $30 at a welding shop to make this thing work, I’m happy with it.

Amazon Customer says:

… tilt mount was well made of quality material and nicely finished it has a design flaw in that the … Although the tilt mount was well made of quality material and nicely finished it has a design flaw in that the basket when pinned in the mount will not transition from horizontal to vertical or vice versa, unless the basket is removed. This is not apparent looking at the pictures on Amazon. The pin holding the basket hits the flanges on the side of the mount after about 20 degrees of movement toward the opposite plane. This is a non starter in my application, as it is underneath the dump bucket…

Write a comment

*